Using a variety of different sizes of fiber and each layer of different density of design, precision combination. By controlling the density of each layer and placing each layer in a different position in the filter material, the filter element can be made to work in a special way with high performance. Each layer of a complete filter element consists of a number of sheets to ensure the removal of contaminants of different sizes. 

Product main parameters: 

1. Working pressure: 0.4 MPA, 1.6 MPA, 4.0 MPA, 6.4 MPA (more than 6.4 MPA can be customized)

2. Connection Flange: Ansi 150/300/600rf PN 16/40/63/100rf 

3. Working temperature:-10 ~ + 50 °C 

4. FILTERING PRECISION: 3 ΜM, 5 ΜM, 10 ΜM, 

5. FILTERING EFFICIENCY: 99.9% filtering the solid particles above 3Μ (depending on the accuracy of the selected filter element)

6. Suitable medium: Natural Gas, artificial gas, liquefied gas and other non-corrosive Gases 

7. STRUCTURE: circular, semi-circular 

8. Filter core material: Polyester Fiber, stainless steel wire Mesh,

 the use of natural gas filter core points for attention: 

in the gas pipeline transportation process, gas source impurities and mechanical impurities in the pipeline will affect the quality of gas transmission and damage some measuring and pressure regulating equipment on the pipeline. Therefore, gas filtration equipment should be installed before every receiving station or important equipment, to ensure the safety of downstream equipment (sometimes through multi-stage filtering) . The filter element is also the main component of these filtering devices, so the selection of the filter element directly affects the filtering effect. According to the unique properties of the gas, the stainless steel net is selected as the main filter material, and the filter element’s filtering area is increased through the folding structure, ensure good gas flow through the good, while increasing the amount of pollution. The seal is made of high and low temperature resistant asbestos pads that ensure a good seal for low temperature gases such as compressed Liquefied petroleum gas. The filter element should be cleaned or replaced in time according to the change of pressure difference in the process of using.